Version History for CobraTig Firmware
SM Versions (Model 254-153)
These versions can only be used on those units with Surface Mount (SM) Controller Board, CobraTig Model 254-153.
VERSION SM13E0-A (5/22/2013) - This version added weld head information (ID to the Setup menu for ease of solving weldhead problems.)
VERSION SM12J0-A (10/11/2012) - This version supports a new printer and new LCD screen. It is not backwards compatible to model 254-152.
SM Versions (Model 254-152) (Replaced by Model 254-153.)
These versions can only be used on those units with Surface Mount (SM) Controller Board, CobraTig Model 254-152.
VERSION SM13E0-S (5/22/2013) - This version added weld head information (ID to the Setup menu for ease of solving weldhead problems.)
VERSION SM12E0-S (05/31/2012) - This version prevents weldhead detection while homing, jogging or during calibration and fixes problem with bar graph display for non-10 RPM heads.
VERSION SM12D0-S (04/09/2012) - This version fixes problem with DiamondBack and scaling motor graph to match with weldhead max. Speed.
VERSION SM11B0-S (02/07/2011) - This version adds a real-time clock feature and prints current time and date on some of the printouts. It prevented program crashing when procedure scale or save
XM Versions (Model 254-151)
These versions can only be used on those units with Extended Memory (XM), CobraTig Model 254-151.
VERSION XM05A0 (09/06/2005) - This version corrects the occasional 'No Final Slope' occurrence when welding 2-1/2" Tube OD and larger.
VERSION XM03J1 (08/31/2005) - This version eliminates MK Maintenance Weld Procedures from reappearing.
VERSION XM03G4 (09/05/2003) - This version has updated Auto Procedure Generating algorithms (XM and SM versions only). - This software eliminates the skipped Final Slope when using a 5003 CopperHead III.
VERSION XM03G3 (08/01/2003)
VERSION XM03A1 (07/01/2002)
Non XM Versions (Model 254-150)
These versions can only be used on CobraTig Model 254-150.
VERSION 03J1 (10/23/2003) - This version eliminates MK Maintenance Weld Procedures from reappearing.
VERSION 03G4 (09/19/2003) - This version has updated Auto Procedure Generating algorithms. - This software eliminates the skipped Final Slope when using a 5003 CopperHead III.
VERSION 02C2 (02/01/2002) - This version has the Model 4000 & 5006 database added. - However, in order to operate the Model 5006 weldhead some minor hardware changes in the CobraTig must be performed.
VERSION 00.8 (09/19/2003) - This version has the MicroTig™ addition and corrected metric tables.